

홈 > 제품소개 > 태양광전지실험 > Solar Simulators
| Solar Simulators | Output Beam Size | Features & Specification | |
|---|---|---|---|
![]() |
Oriel Sol3A Class AAA Solar Simulators |
2”x2” (51x51mm) 4”x4” (102x102mm) 6”x6” (156x156mm) 8”x8” (203x203mm) 12”x12” (300x300mm) |
- Complete line of Class AAA(3A) products |
| - Factory certified CW systems per IEC 60904-9 2007 Edition, | |||
| - JIS C 8912, and ASTM E 927-05 | |||
| - Typical Power Output : 100mW/cm2(1 Sun)±20% Adjustable | |||
| - Spectral Match : 0.75 - 1.25 | |||
| - Uniformity : <2 % | |||
| - Temporal Instability : <0.5% STI, <2.0% LTI | |||
| - Working Distance : 4.0 ~ 12 ±0.5 in | |||
| - Collimation Angle : <± 1°~<±4 ° | |||
| - Lamp Power : 450 W Xenon ~ 1600W Xenon | |||
![]() |
Oriel® Sol2A Class ABA Solar Simulators |
2”x2” (51x51mm) 4”x4” (102x102mm) 6”x6” (156x156mm) 8”x8” (203x203mm) 12”x12” (300x300mm) |
- Complete line of Class ABA(2) products |
| - Factory certified CW systems per IEC 60904-9 2007 Edition, | |||
| -JIS C 8912, and ASTM E 927-05 | |||
| - Typical Power Output : 100mW/cm2(1 Sun)±20% Adjustable | |||
| - Spectral Match : 0.75 - 1.25 | |||
| - Uniformity : ≤±3% | |||
| - Temporal Instability : <0.5% STI, <2.0% LTI | |||
| - Working Distance : 1.25 ~ 7.0in | |||
| - Collimation Angle : <2°~<6 ° | |||
| - Lamp Power : 150 W Xenon ~ 1600W Xenon | |||
![]() |
Oriel® So1A Class ABB Solar Simulators |
2”x2” (51x51mm) 4”x4” (102x102mm) 6”x6” (156x156mm) 8”x8” (203x203mm) 12”x12” (300x300mm) |
- Complete line of Class ABB(1A) products |
| - Factory certified CW systems per IEC 60904-9 2007 Edition, | |||
| - JIS C 8912, and ASTM E 927-05 | |||
| -Typical Power Output : 100mW/cm2(1 Sun)±20% Adjustable | |||
| - Spectral Match : 0.75 - 1.25 | |||
| - Uniformity : ≤±3% ~ ≤±5% | |||
| - Temporal Instability : <0.5% STI, <2.0% LTI | |||
| - Working Distance : 1.25 ~ 7.0in | |||
| - Collimation Angle : <± 2°~<6 ° | |||
| - Lamp Power : 150 W Xenon ~ 1600W Xenon | |||
![]() |
Fiber Based Optic Solar Simulator |
10mm~20mm Diameter (depends on used accessory) |
- Low cost alternative for low power applications |
| - Optional AM1.5G Filter, Fibers with collimation Probe/Holders | |||
| - Optional Beam Turning Assembly | |||
| - Typical Power Output : 100mW/cm2(1 Sun) Adjustable | |||
| - 150W or 300W Sources | |||
![]() |
UV Solar Simulator | 2”x2” (51x51mm) 4”x4”(102x102mm) 6”x6” (156x156mm) 8”x8” (203x203mm) |
- Very high intensity UV, and little VIS and IR |
| - The aluminized mirror with UVB/UVA Dichroic Mirror | |||
| (280 to 400 nm) | |||
| - Lamp Power : 300W, 1000W & 16000 W Xenon, UV Enhanced | |||
| - UVB/C & UVC Blocking Filters(Optional) | |||
| - Compliance with FDA, COLIPA & JCIA Requlations | |||
| - SPF Testing | |||
![]() |
Custom Solar Simulators |
2”x2” (51x51mm) 4”x4” (102x102mm) 6”x6” (156x156mm) 8”x8” (203x203mm) |
- Complete line of Class AAA(3A) products |
| - Beam Configuration : Upper or Side Direction | |||
| - It is compatible with glove box with window | |||
| - Optional raiser | |||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| Bandpass Filters for UV Solar Simulators |
Air Mass Filters |
Hi Flux Beam Concentrator for Solar Simulators |
Reference Solar Cell and Meter |
Uniformity Measurement Tool |
Exposure Control Instruments for Large Area Illuminators |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| Partial SUN Attenuator |
IV Test Station |
Solar Configuration | Air-Mass Conditions | UV Fused Silica Transmission curve | KG1~KG5 Transmission curve |
Simulation of Solar Irradiation
Solar Simulator Sample Calculations
Optical Radiation Terminology and Units
Solar Simulator Definitions of Characteristics